View LTA320W2-L14_150619.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Production Information
Customer :
SAMSUNG TFT-LCD SAMSUNG TFT-LCD
DATE : 28.Sep.2005
MODEL : LTA320W2-L14 MODEL : LTA320W2-L14
Any Modification of Specification is not allowed without SEC's Permission.
NOTE :
www..com
Customer's Approval
DATE Suk-yong son
DATE 26.Sep.2005 DATE 26.Sep.2005
LCD Application Engineering 3, TCS Team Samsung Electronics Co . , LTD.
Contents Revision History -------------------------------------------------------------------------------------------- (3) General Description --------------------------------------------------------------------------------------- (4) General Information --------------------------------------------------------------------------------------- (4) 1. Absolute Maximum Ratings -------------------------------------------------------------------------- (5) 2. Optical Characteristics --------------------------------------------------------------------------------- (7) 3. Electrical Characteristics ----------------------------------------------------------------------------- (10) 3.1 TFT LCD Module 3.2 Back Light Unit 3.3 Inverter Input & Specification 4. Block Diagram ------------------------------------------------------------------------------------------- (13) 5. Input Terminal Pin Assignment --------------------------------------------------------------------- (14) 5.1 Input Signal & Power 5.2 Inverter Input Pin Configuration 5.3 Inverter Input Power Sequence 5.4 LVDS Interface 5.5 Input Signals, Basic Display Colors and Gray Scale of Each Color 6. Interface Timing ---------------------------------------------------------------------------------------- (19) 6.1 Timing Parameters (DE only mode) 6.2 Timing Diagrams of interface Signal (DE only mode) 6.3 Power ON/OFF Sequence
www..com 7. Outline Dimension
-------------------------------------------------------------------------------------- (22)
8. Packing --------------------------------------------------------------------------------------------------- (25) 9. Marking & Others --------------------------------------------------------------------------------------- (25) 10. Inspection Criteria ------------------------------------------------------------------------------------- (26) 11. General Precaution ----------------------------------------------------------------------------------- (27) 11.1 Handling 11.2 Storage 11.3 Operation 11.4 Operation Condition Guide 11.5 Others
* Revision History
Date Sep 26, 2005 Rev. No 000 Page all Summary First issued
www..com
General Description
Description LTA320W2-L14 is a color active matrix liquid crystal display (LCD) that uses amorphous silicon TFT(Thin Film Transistor) as switching components. This model is composed of a TFT LCD panel, a driver circuit and a back light unit. The resolution of a 32.0" is 1366 x 768 and this model can display up to 16.7 million colors with wide viewing angle of 89 or higher in all directions. This panel is intended to support applications to provide a excellent performance for Flat Panel Display such as Home-alone Multimedia TFT-LCD TV, Display terminals for AV application products, and High Definition TV (HDTV). Features RoHS compliance (Pb-free) High contrast ratio, high aperture ratio, fast response time APVA(Advanced Patterned Vertical Align) mode Wide viewing angle ( 178 ) High speed response WXGA (1366 x 768 pixels) resolution (16:9) Low Power consumption Direct Type 16 CCFTs(Cold Cathode Fluorescent Tube) DE(Data Enable) mode LVDS (Low Voltage Differential Signaling) interface (1pixel/clock)
General Information
Items Module Size
www..com
Specification 760.0(HTYP) x 450.0(VTYP) 51.0(DMAX) 7,300(Max) 0.51075(H) x 0.17025(W)*3 697.6845(H) x 392.256(V) Haze 44% , Hard-coating (3H) 8 bit - 16.7M 1366 x 768 RGB vertical stripe Normally Black 450 (Typ.)
Unit mm g mm mm
Note 1.0mm
Weight Pixel Pitch Active Display Area Surface Treatment Display Colors Number of Pixels Pixel Arrangement Display Mode Luminance of White
Typ : 7,000
colors pixel
cd/m2
1. Absolute Maximum Ratings
If the condition exceeds maximum ratings, it can cause malfunction or unrecoverable damage to the device.
Item Power Supply Voltage Storage temperature Glass surface temperature (Operation) Center T. Uniformity
Symbol VDD TSTG TOPR
T
Min. GND-0.5 -20 0 -
Max. 6.5 60 50
Unit V
Note (1) (2) (2),(5)
10 50 1.5 G G (3) (4)
Shock ( non - operating ) Vibration ( non - operating )
Snop Vnop
Note (1) Ta= 25 2 C (2) Temperature and relative humidity range are shown in the figure below. a. 90 % RH Max. (Ta 39 C) b. Maximum wet-bulb temperature at 39 C or less. (Ta 39 C) c. No condensation (3) 11ms, sine wave, one time for X, Y, Z axis (4) 10-300 Hz, Sweep rate 10min, 30min for X,Y,Z axis
www..com
Fig. Temperature and Relative humidity range
(5) Definition of test point 5mm 5mm
1 2
5
LCD Module (Active)
3 4
T should be less than 10
(
T = | TOPR - TMAX| )
TOPR : Temperature of the center of the glass surface (Test point 5) T1~ T4 : Temperature of each edge of the glass surface TMAX : The highest temperature of the glass surface
www..com
2. Optical Characteristics
The optical characteristics should be measured in a dark room or equivalent. Measuring equipment : TOPCON BM-7,SPECTRORADIOMETER SR-3
(Ta = 25
Item Contrast Ratio (Center of screen) Rising Response Time Falling G-to-G Luminance of White (Center of screen) Red Symbol C/R Tr Tf Tg YL Rx Ry Gx Gy Bx By Wx Wy L R U D Buni C/R 10 75 75 75 75 Normal L,R=0 U,D=0 Viewing Angle TYP. -0.03
2 C, VDD=5V, fv= 60Hz, fDCLK=75MHz, IL = 7.0mArms)
Min. 800 400 Typ. 1200 8 6 8 450 0.642 0.332 0.276 0.600 0.144 0.161 0.280 0.290 72 10000 89 89 89 89 25 % (4) SR-3 Degree (8) SR-3 % K (7) SR-3 (7) SR-3 TYP. +0.03 (7),(8) SR-3 Max. 12 10 cd/m2 (6) SR-3 msec (5) BM-7 Unit Note (3) SR-3
Condition
Color Chromaticity (CIE 1931)
Green
Blue
White Color Gamut Color Temperature
www..com
Hor. Viewing Angle Ver. Brightness Uniformity (9 Points)
Note (1) Test Equipment Setup The measurement should be executed in a stable, windless and dark room between 40min and 60min after lighting the back light at the given temperature for stabilization of the back light. This should be measured in the center of screen. Single lamp current : 6.0mA Environment condition : Ta = 25
2C
Photo detector SR-3 BM-7
Field 1 2
Photo detector
Field
SR-3 : 50 BM-7 : 50 TFT - LCD Module LCD Panel
The center of the screen
Note (2) Definition of test point 228 128 683 1138 Active Area Test Point 384
www..com
640
Note (3) Definition of Contrast Ratio (C/R) : Ratio of gray max (Gmax) & gray min (Gmin) at the center point
of the panel
C/R=
G max G min
Gmax : Luminance with all pixels white Gmin : Luminance with all pixels black
Note (4) Definition of 9 points brightness uniformity
Buni = 100
( B max - B min) B max
Bmax : Maximum brightness Bmin : Minimum brightness Note (5) Definition of Response time : Sum of Tr, Tf Display data
Black (data off) White (data on) White (data off)
TR Optical Instruments 100% Response 90%
TF
10% 0% TIME Note (6) Definition of Luminance of White : Luminance of white at center point Note (7) Definition of Color Chromaticity (CIE 1931) Color coordinate of Red, Green, Blue & White at center point
www..com
Note (8) Definition of Viewing Angle : Viewing angle range (C/R
10)
3. Electrical Characteristics
3.1 TFT LCD Module
The connector for display data & timing signal should be connected. Ta = 25 C
Item Voltage of Power Supply Current of Power Supply (a) Black (b) White (c) N-Pattern fV fH fDCLK IRUSH IDD Symbol VDD Min. 4.5 44 65 Typ. 5.0 1000 1250 1500 60 47.3 75 Max. 5.5 2000 82 4 Unit V mA mA mA Hz kHz MHz A (4) (2),(3)
2C
Note (1)
Vsync Frequency Hsync Frequency Main Frequency Rush Current
Note (1) The ripple voltage should be controlled under 10% of VDD. (2) fV=60Hz, fDCLK = 75MHz, VDD = 5.0V, DC Current. (3) Power dissipation check pattern (LCD Module only) a) Black Pattern b) White Pattern c) N-Pattern
www..com
(4) Measurement Conditions VDD
100% 90% 10% GND
TRUSH=470 Rush Current IRUSH can be measured when TRUSH. is 470 .
3.2 Back Light Unit
The back light unit contains 16 direct-lighting type CCFTs ( Cold Cathode Fluorescent Tube ). The characteristics of lamps are shown in the following tables. Ta=25 2 C
Item Lamp Current Lamp Voltage Operating Life Time Symbol IL VL Hr Min. 4.0 50,000 Typ. 5.0 1340 Max. TBD Unit mArms Vrms Hour (1) Note
Note (1) It is defined as the time to take until the brightness reduces to 50% of its original value. [Operating condition : Ta = 25 2 , IL = 6.0mArms(typ.), For single lamp only. ]
HOT 1
COLD 1 COLD 2
Inverter Inverter
HOT 2
LCD Module
HOT 15 COLD 15 COLD 16
www..com
HOT 16
3.2.1 Inverter Input Condition & Specification
Items Input Voltage Input Current Lamp Current Frequency Backlight On/Off Dimming Control Symbol Vin IRUSH ISAT IO FLAMP ON OFF VDIM Conditions Min. Vin=24.0V Vdim=3.3V Vdim=3.3 V Vin=24.0 V Vin=24.0 V Vin=24.0 V Max Lum Min. Lum 22 4.5 7.0 55 2.4 0 3.3 Specifications Typ. 24 TBD 7.5 60 Max. 26 6.0 8.0 65 5.0 0.8 TBD 0 V mArms kHz V V A Ta=25 Initial Turn-on 1 hour aging Unit Note
www..com
www..com
4. Block Diagram
SSC(P2042A)
T-CON USER CONNECTOR (JAE FI-E30S) DC/DC STEP DOWN 2.5V DCC MEMORY (LVDS + RSDS) LRX4222T3 DATA Dr.IC
SOURCE
FPC
S6C2104 (414CH)X5
PCB
LTA320W2 PANEL
1366 x 768 x RGB
DC/DC CONVERTER AVDD / VDD / VON / VOFF
SOURCE PCB
GAMMA-GEN.
FPC
DATA Dr.IC S6C2104 (414CH)X5
DATA CONTROL VIN(5.0V) AVDD Von/Voff VCOM Voltage VDD(3.3V) VDD(2.5V)
VCOM -GEN R-STRING + FB
CONTROL PCB
GATE Dr. IC HX8632BCS02A (256CH) X 3
5. Input Terminal Pin Assignment
5.1. Input Signal & Power
PIN No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Description No Connection No Connection No Connection GND RxIN0RxIN0+ GND RxIN1RxIN1+ GND RxIN2RxIN2+ GND RxCLKRxCLK+ PIN No. 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30
Connector : FI-E30S (JAE)
Description GND RxIN3RxIN3+ GND GND LVDS OPTION (Note 1) No Connection GND GND GND Vin Vin Vin Vin Vin
Note No Connection: This PINS are only used for SAMSUNG internal using. (1) LVDS OPTION : If this PIN : HIGH (3.3 V) or Open Normal LVDS format : LOW (GND) JEIDA LVDS format SEQUENCE : On = VDD(T1) LVDS Option Interface Signal(T2) OFF = Interface Signal(T3) LVDS Option VDD www..com
Note(1) Pin number starts from Right side
PCB
Pin No. 1 Pin No. 30
#1
#30
connect name
#1 #30
Fig. Connector diagram
www..com
a. All GND pins should be connected together and also be connected to the LCD's metal chassis. b. All power input pins should be connected together. c. All NC pins should be separated from other signal or power.
5.2. Inverter Input Pin Configuration
Connector : S14B-PHA-SM-TB(LF) (JST)
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Pin Configuration(FUNCTION) 24 V 24 V 24 V 24 V 24 V GND GND GND GND GND No Connection * ERROR DETECTION (NORMAL : GND / ABNORMAL : 5V) Backlight On /Off [ON:2.4 - 5.25 V, OFF: 0 - 0.8 V] Dimming Control [0V:Min, 3.3V:Max] PWM Pulse [ 0V:Min (duty 20%) ~ 3.3V:Max (Duty100%) ] Note (1)
Note PWM Dimming Control (Use Pin 14) : Pin 13 must fix at 3.3V Analog Dimming Control (Use Pin 13) : Pin 14 must fix at GND (1) High-duty = On/(On+Off) * 100 On Off
www..com
5.3. Inverter Input Power Sequence
20msec [Min] 0.95 Vin 0.1 Vin 1.1sec [Min]
Vin (24V)
Dimming Control ( 0 ~ 3.3 V ) On 0.5sec [Min] Off 0.5sec [Min] Back Light On/Off 2.4 V
0.5sec [Min]
0.1sec [Min]
5.4 LVDS Interface - LVDS Receiver : Tcon (merged) - Data Format (JEIDA & Normal)
LVDS pin TxIN/RxOUT0 TxIN/RxOUT1 TxIN/RxOUT2 TxOUT/RxIN0 TxIN/RxOUT3 TxIN/RxOUT4 TxIN/RxOUT6 TxIN/RxOUT7 TxIN/RxOUT8 TxIN/RxOUT9 TxIN/RxOUT12 TxOUT/RxIN1 TxIN/RxOUT13 TxIN/RxOUT14 TxIN/RxOUT15 TxIN/RxOUT18 TxIN/RxOUT19 TxIN/RxOUT20
www..com
JEIDA -DATA R2 R3 R4 R5 R6 R7 G2 G3 G4 G5 G6 G7 B2 B3 B4 B5 B6 B7 HSYNC VSYNC DEN R0 R1 G0 G1 B0 B1 RESERVED
VESA -DATA R0 R1 R2 R3 R4 R5 G0 G1 G2 G3 G4 G5 B0 B1 B2 B3 B4 B5 HSYNC VSYNC DEN R6 R7 G6 G7 B6 B7 RESERVED
TxIN/RxOUT21 TxIN/RxOUT22 TxIN/RxOUT24 TxIN/RxOUT25 TxIN/RxOUT26 TxIN/RxOUT27 TxIN/RxOUT5 TxIN/RxOUT10
TxOUT/RxIN2
TxOUT/RxIN3
TxIN/RxOUT11 TxIN/RxOUT16 TxIN/RxOUT17 TxIN/RxOUT23
5.5 Input Signals, Basic Display Colors and Gray Scale of Each Color
DATA SIGNAL COLOR DISPLAY (8bit) R0 BLACK BLUE GREEN BASIC COLOR CYAN RED MAGENTA YELLOW WHITE BLACK 0 0 0 0 1 1 1 1 0 1 DARK GRAY SCALE OF RED LIGHT 0 : : 1 0 RED BLACK 1 0 0 DARK GRAY SCALE OF GREEN 0 : : LIGHT 0 0 GREEN BLACK 0 0 0 DARK GRAY SCALE OF BLUE LIGHT 0 : : 0 0 BLUE 0 R1 0 0 0 0 1 1 1 1 0 0 1 : : 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 R2 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 RED R3 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 R4 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 R5 0 0 0 0 1 1 1 1 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 R6 0 0 0 0 1 1 1 1 0 0 0 GREEN R7 G0 G1 G2 G3 G4 G5 G6 G7 0 0 0 0 1 1 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 1 0 : : 1 0 1 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 1 : : 0 1 1 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 1 1 0 0 1 1 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 0 0 0 : : 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 0 1 1 0 0 0 0 0 1 1 0 0 1 1 0 0 0 B0 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 1 0 : : 1 0 1 B1 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 1 : : 0 1 1 B2 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 BLUE B3 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 B4 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 B5 0 1 0 1 0 1 0 1 0 0 0 : : 0 0 0 0 0 0 : : 0 0 0 0 0 0 : : 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 B6 0 1 0 1 0 1 0 1 0 0 0 B7 0 1 0 1 0 1 0 1 0 0 0 R0 R1 R2 R3~ R252 R252 R252 R252 G0 G1 G2 G3~ G252 G252 G252 G252 B0 B1 B2 B3~ B252 B252 B252 B252 GRAY SCALE LEVEL
www..com
Note) Definition of Gray : Rn : Red Gray, Gn : Green Gray, Bn : Blue Gray (n = Gray level) Input Signal : 0 = Low level voltage, 1 = High level voltage
6. Interface Timing
6.1 Timing Parameters ( DE only mode )
SIGNAL Clock Hsync Vsync Active Display Period Vertical Total Active Display Period Horizontal Total Frequency ITEM SYMBOL 1/TC FH FV TVD MIN. 65 44 TYP. 75 48 60 768 MAX. 82 53 Unit MHz KHz Hz lines NOTE -
Vertical Display Term
TVB
773
838
1200
lines
-
THD
-
1366
-
clocks
-
Horizontal Display Term
TH
1460
1600
2000
clocks
-
Note) This product is DE only mode. The input of Hsync & Vsync signal does not have an effect on normal operation. (1) Test Point : TTL control signal and CLK at LVDS Tx input terminal in system www..com Internal VDD = 3.3V (2)
6.2 Timing diagrams of interface signal ( DE only mode )
TV TVD TVB
DE
TH THD
DE
DCLK
TC
DATA SIGNALS
TC
www..com
TCH
TCL
DCLK
TDS TDH
0.5 VCC
DISPLAY DATA
TES
0.5 VCC
DE
0.5 VCC
6.3 Power ON/OFF Sequence
To prevent a latch-up or DC operation of the LCD Module, the power on/off sequence should be as the diagram below.
01000msec T5 (Recommend Value) 100msec T6 (Recommend Value)
www..com
T1 : VDD rising time from 10% to 90% T2 : The time from VDD to valid data at power ON. T3 : The time from valid data off to VDD off at power Off. T4 : VDD off time for Windows restart T5 : The time from valid data to B/L enable at power ON. T6 : The time from valid data off to B/L disable at power Off.
The supply voltage of the external system for the Module input should be the same as the definition of VDD. Apply the lamp voltage within the LCD operation range. When the back light turns on before the LCD operation or the LCD turns off before the back light turns off, the display may momentarily show abnormal screen. In case of VDD = off level, please keep the level of input signals low or keep a high impedance. T4 should be measured after the Module has been fully discharged between power off and on period. Interface signal should not be kept at high impedance when the power is on.
7. Outline dimension(FRONT VIEW)
moc.U4teehSataD.www
REAR VIEW
8. PACKING
8.1 CARTON (Internal Package)
(1) Packing Form Corrugated fiberboard box and corrugated cardboard as shock absorber (2) Packing Method
Packing -Pallet Box
Direction be able to open it
Cushion-Foam
LCD Module
Cushion-Foam Pallet-Plastic
www..com
8.2 Packing Specification
Item Specification 12ea / (PackingPallet Box) Remark 1. 84 Kg / LCD (12ea) 2. 7 Kg / Cushion-pallet (2ea) 3. 8.8 Kg / Packing-Pallet Box (1ea) 4. Cushion-pallet Material : EPS 5. Packing-Pallet Box Material : DW4 1. Pallet weight = 8kg 2. 8Kg/Pallet
LCD Packing
Pallet Packing Direction Total Pallet Size Total Pallet Weight
1Box / Pallet Vertical H x V x height 107.8 kg
1150mm(H) x 985mm(V) x 125mm(height) Pallet(8kg) + Module(7*12=84) + Cushion(up+botton=7kg) + Pallet-BOX(8.8kg)
9. MARKING & OTHERS
A nameplate bearing followed by is affixed to a shipped product at the specified location on each product. (1) Parts number : LTA320W2-L14-XXXX (2) Revision: One letters (3) Lot number : X X X X XXX XX X Cell Position No. (In the Glass) Glass No. (In the one Lot) Lot No. (Glass) Month Year (Note1) Product code Line (4) Nameplate Indication Week code : 05 29 LTA320W2-L14
40mm
week year
Revision code Lot number
www..com
80mm
(5) Packing box attach
100mm
Part number
Revision code
Box serial number
165mm
(6) Others 1. After service part Lamps cannot be replaced because of the narrow bezel structure.
10. Inspection Criteria
When products are shipped, incoming inspection should be carried out with a sampling inspection based on MIL-STD-105E level II by AQL 1.0%. CHANGE CONTROL Design of the product may be changed regarding the specifications, appearance, parts used, circuits, etc. for product improvement. If a design change is judged to affect the specifications of this product, supplier should inform customer of the change in advance. QUALITY CONTROL In the event of a product failure under normal operating conditions, a product trouble or a functional disorder that can be deemed to be the responsibility of supplier, supplier should repair the fault or replace the product free of charge within one year from the product delivery date. However, supplier does not take responsibility for the product quality in the case of modifications not specified by supplier. MAINTENANCE The specifications of the functions of maintenance parts may be partially changed within the range which provides equivalent or better quality. In principle, maintenance parts should be product units. When stopping manufacturing this product, supplier should notify customer in advance. HANDLING OF DOUBTFUL POINTS
www..com
Any doubt not stipulated in this specification is to be resolved by mutual agreement between customer and supplier, and supplier should make efforts for improvement in good faith.
11. General Precautions
11.1 Handling
(a) When the Module is assembled, it should be attached to the system firmly using all mounting holes. Be careful not to twist and bend the Module. (b) Because the inverter use high voltage, it should be disconnected from power before it is assembled or disassembled. (c) Refrain from strong mechanical shock and / or any force to the Module. In addition to damage, this may cause improper operation or damage to the Module and CCFT back light. (d) Note that polarizers are very fragile and could be damage easily. Do not press or scratch the surface harder than a HB pencil lead. (e) Wipe off water droplets or oil immediately. If you leave the droplets for a long time, staining or discoloration may occur. (f) If the surface of the polarizer is dirty, clean it using absorbent cotton or soft cloth. (g) Desirable cleaners are water, IPA(Isopropyl Alcohol) or Hexane. Do not use Ketone type materials(ex. Acetone), Ethyl alcohol, Toluene, Ethyl acid or Methyl chloride. It might permanent damage to the polarizer due to chemical reaction. (h) If the liquid crystal material leaks from the panel, it should be kept away from the eyes or mouth . In case of contact with hands, legs or clothes, it must be washed away with soap thoroughly.
www..com
(i) Protect the Module from static, or the CMOS Gate Array IC would be damaged. (j) Use finger-stalls with soft gloves in order to keep display clean during the incoming inspection and assembly process. (k) Do not disassemble the Module. (l) Do not pull or fold the lamp wire. (m) Do not adjust the variable resistor located on the Module. (n) Protection film for polarizer on the Module should be slowly peeled off just before use so that the electrostatic charge can be minimized. (o) Pins of I/F connector should not be touched directly with bare hands.
11.2 Storage
(a) Do not leave the Module in high temperature, and high humidity for a long time. It is highly recommended to store the Module with temperature from 0 to 35 and relative humidity of less than 70%. (b) Do not store the TFT-LCD Module in direct sunlight. (c) The Module should be stored in a dark place. It is prohibited to apply sunlight or fluorescent light in storing.
11.3 Operation
(a) Do not connect or disconnect the Module in the "Power On" condition. (b) Power supply should always be turned on/off by the "Power on/off sequence" (c) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference should be done by system manufacturers. Grounding and shielding methods may be important to minimize the interference. (d) The cable between the back light connector and its inverter power supply should be connected directly with a minimized length. A longer cable between the back light and the inverter may cause lower luminance of lamp(CCFT) and may require higher startup voltage(Vs).
11.4 Operation Condition Guide
www..com
(a) The LCD product should be operated under normal conditions. Normal condition is defined as below; - Temperature : 20 15 - Humidity : 55 20% - Display pattern : continually changing pattern (Not stationary) (b) If the product will be used in extreme conditions such as high temperature, humidity, display patterns or operation time etc.., It is strongly recommended to contact SEC for Application engineering advice. Otherwise, its reliability and function may not be guaranteed. Extreme conditions are commonly found at Airports, Transit Stations, Banks, Stock market, and Controlling systems.
11.5 Others
(a) Ultra-violet ray filter is necessary for outdoor operation. (b) Avoid condensation of water. It may result in improper operation or disconnection of electrode. (c) Do not exceed the absolute maximum rating value. ( supply voltage variation, input voltage variation, variation in part contents and environmental temperature, and so on) Otherwise the Module may be damaged. (d) If the Module keeps displaying the same pattern for a long period of time, the image may be "sticked" to the screen. To avoid image sticking, it is recommended to use a screen saver. (e) This Module has its circuitry PCB's on the rear side and should be handled carefully in order not to be stressed. (f) Please contact SEC in advance when you display the same pattern for a long time.
www..com

▲Up To Search▲

Price & Availability of LTA320W2-L14

	To Download LTA320W2-L14 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .